Colortrac Scanner Software
The Software and Technical documentation on this page are being provided to you as a courtesy by
The Raster Shop, LLC and by the kind permission of
Colortrac, Inc.
Please note that this is "AS IS"
software and documentation with no warranties expressed or implied, and you use entirely at your own risk.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL "THE RASTER SHOP, LLC" or "COLORTRAC, INC" BE LIABLE FOR PERSONAL
INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES
FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR
RELATED TO YOUR USE OR INABILITY TO USE THIS SOFTWARE OR DOCUMENTATION, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF
LIABILITY [CONTRACT, TORT OR OTHERWISE] AND EVEN IF "THE RASTER SHOP, LLC" or "COLORTRAC, INC" HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Software Downloads
AIS4 Diagnostics
This is the standalone application allowing you to test the basic functionality
of your Colortrac Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480,
FB24120 [XLF, SLF, e]] or an ANA Tech Eagle scanner based on the Colortrac Series
4 Main Board, these are the 27160c, 42101c, 42160c and the 62101c. This application allows you to update the scanners
Firmware, to cycle the scanners lamps, to Normalize the scanner along with a host of other functions that a Service
Engineer will find handy to have around.
ReproWorks
This is a Scan-to-File and Scan-to-Print application developed for the Tangent Sheet-feed range
of scanners, it was updated to support the Tangent Flatbed and Colortrac Series
4 [3640, 3680, 4260, 4280, 4860, 5480, FB24120 [XLF, SLF, e]] scanners. ReproWorks requires a programmed hardware lock
key or "Dongle" to function. Don't be fooled, this application will run
but it will watermark your raster images and prints then completely
stop after thirty days if the Dongle is not present.
Scan Manager
This is a suite of software designed to acquire scanned images from an
Colortrac Series 3 scanner [340, 360, 380 [Cx, Gx, Gx+]], this version
supports the Colortrac Series 4 scanner [3640, 3680, 4260, 4280, 4860,
5480, FB24120 [XLF, SLF, e]] also but you would be better off using the
Colortrac Series 4 Installation Software. This suite of
software contains the Diagnostic module in the Engineering Menu and Scan-to-File application in
a zipform of the original distribution CD. Please note you
will need an ASPI Manager installed on
your system and Administrator rights to install and operate the scanner. The Auto Stitch Target for the Series 3 scanners
can found under the Colortrac documents section on this website.
Colortrac Series 4 Installation Software
This is a suite of software designed to acquire scanned
images from a Colortrac Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480,
FB24120 [XLF, SLF, e]] or an ANA Tech Eagle scanner based on the Colortrac Series
4 Main Board, these are the 27160c, 42101c, 42160c and the 62101c. This suite of software contains Scan-to-File application a
Scan-to-Print application in a zip form of the original
distribution CD. Also, you will need an ASPI
Manager installed on your system and Administrator rights to install and operate the scanner if you are using the SCSI
interface. The Auto Stitch Target for the Series 4 scanners can found under the
Colortrac documents section on this website.
Colortrac Series 4 Microsoft Windows Driver
This is the Microsoft Windows Driver for the
entire Colortrac Series 4 range[3640, 3680, 4260, 4280, 4860, 5480,
FB24120 [XLF, SLF, e]], the Colortrac Flatbed 24120 and the ANA Tech Eagle
scanner based on the Colortrac Series 4 Main Board, these are the 27160c, 42101c,
42160c and the 62101c.
Colortrac Series 4 Plot Correction
This utility application was designed to allow the Service
Engineer to look at the raw data from the scanners cameras with out the need for an
Oscilloscope or other specialized test equipment. With this
application you can re-align the scanner and check for most data type errors. Please note that this application
does not work with the Colortrac 3640 scanner, and it is known to time out after a period of time, which is based
on the scanner native Resolution and the selected Factional Speed setting. This application is compatible
Colortrac Series 4 scanner[3640, 3680, 4260, 4280, 4860, 5480,
FB24120 [XLF, SLF, e]] or an ANA Tech Eagle scanner based on the Colortrac
Series 4 Main Board, these are the 27160c, 42101c, 42160c and the 62101c apart from
the Colortrac 3640 as already mentioned
Colortrac Series 3 Firmware
Downloadable Microcode or
Firmware for the Colortrac Series
3 scanner [340, 360, 380 [Cx, Gx, Gx+]] range. Digital Board Version 1 and Digital Board Version 2 Firmware is included in
this zip format downloadable file.
Colortrac Series 4 Firmware Va37
Downloadable Microcode
or Firmware for the Colortrac
Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480, FB24120 [XLF, SLF, e]] range. Please note that the actual version of
Firmware that you need to download for your scanner depends on the Digital Board version and the Camera Boards that are
installed in your particular scanner. Please note if you install the incorrect version of Firmware
the "yellow" LED will flash to signify that the Digital Board
did not reset correctly. This version of Firmware that is compatible with the Dual SCSI Digital Board is included in
this zip format downloadable file.
Colortrac Series 4 Firmware Ve54
Downloadable Microcode
or Firmware for the Colortrac
Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480, FB24120 [XLF, SLF, e]] range. Please note that the actual version
of Firmware that you need to download for your scanner depends on the Digital Board version and the Camera Boards that are
installed in your particular scanner. Please note if you install the incorrect version of Firmware the "yellow"
LED will flash to signify that the Digital Board did not reset
correctly. This version of Firmware that is compatible with the Single SCSI / Fire wire Digital Board is included in this
zip format downloadable file.
Colortrac Series 4 Firmware Va60
Downloadable Microcode
or Firmware for the Colortrac
Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480, FB24120 [XLF, SLF, e]] range. Please note that the actual version
of Firmware that you need to download for your scanner depends on the Digital Board version and the Camera Boards that are
installed in your particular scanner. Please note if you install the incorrect version of Firmware the "yellow"
LED will flash to signify that the Digital Board did not reset
correctly. This version of Firmware that is compatible with the Single SCSI / Fire wire Digital Board is included in this
zip format downloadable file.
Colortrac Series 4 Firmware Combined
Downloadable Microcode
or Firmware for the Colortrac
Series 4 scanner [3640, 3680, 4260, 4280, 4860, 5480, FB24120 [XLF, SLF, e]] range. Please note that the actual version
of Firmware that you need to download for your scanner depends on the Digital Board version and the Camera Boards that are
installed in your particular scanner. Please note if you install the incorrect version of Firmware the "yellow"
LED will flash to signify that the Digital Board did not reset
correctly. This version of Firmware that is compatible with the Single SCSI / Fire wire Digital Board is included in this
zip format downloadable file.
Requirements: Microsoft Windows 2000, XP, NT 4.0 and scanner
|
Custom Software
The Raster Shop, LLC has software developers ready to tackle you custom coding requirements. We normally code in C++, Objective-C, C# and Real Basic for standalone applications. PHP, MySQL, .NET, XML, CSS and HTML for web applications. Please contact us with your requirements and lets see if we can help you out.